SELF-FLOATING PWC LIFT SPECIFICATIONS

Roller Aided Boarding and Launching
Heavy-duty Stoltz brand Super Rollers aid in docking and launching by allowing the PWC to roll on and off board. Polyurethane rollers with stainless steel and solid brass hardware won't corrode, develop flat spots or mar the hull's finish.

EZ Port II Adjustable Rollers
EZ Port models two and three have an adjustable center roller that makes it simple to adapt it specifically to your craft. Position the roller in either of two trays in two different configurations to achieve four heights. Add an additional roller if desired.

Anchor to Any Dock, Floating or Stationary
A wide variety of anchoring hardware is available to use EZ Port with the complete EZ Dock system, or other types of docks.

Anchor to the EZ Dock System with our coupler assemblies.

Anchor EZ Port to ordinary floating docks with our hinge kit.

Anchor to a stationary pier with a pair of pipe brackets and stand-off brackets.

There's an EZ Port Model
That's Right For You

The EZ Port configurations shown are estimates based on PWC gross weight, including fuel, oil and cargo. Estimated weight recommendations are intended to keep the PWC above the waterline. Amount of freeboard will vary depending on the PWC's weight and option used. E. EZ Port 3 Recommended for PWCs up 1300 lb. gross weight.
 

A. Original EZ Port
Recommended for PWCs up 625 lb. gross weight.

B. EZ Port II
Recommended for PWCs up 800 lb. gross weight.

C. Original EZ Port
with Extension
Recommended for PWCs
up 725 lb. gross weight.

D. EZ Port II
with Extension
Recommended for PWCs
up 900 lb. gross weight.

E. EZ Port 3
 Recommended for PWCs
up 1300 lb. gross weight.

Specifications
Construction:Linear-low density polyethylene with UV stabilizer.
Thickness: Minimum thickness of 5/16", up to 3/8" thick in high impact areas.
Color: Light Beige. Color will determine the temperature of your dock. Dark colors absorb and hold heat. Light colored objects reflect heat so they stay cooler. Not only is this important to bare feet, it protects the dock as well; an over-heated poly-type dock can become soft and prone to distortion.

Original EZ Port
118" long, 59" wide, 15" high
Section weight: 230 lbs.
Approx. gross load capacity: 625 lbs.
Rollers: 1 fixed stern roller
Part #206010PW

EZ Port II
127" long, 59" wide, 15" high
Section weight: 240 lbs.
Approx. gross load capacity: 800 lbs.
Rollers: 1 fixed stern roller, 1 adjustable middle roller
Part #206011PW

EZ Port 3
151" long, 59" wide, 15" high
Section weight: 280 lbs.
Approx. gross load capacity: 1300 lbs.
Rollers: 1 fixed stern roller,
2 adjustable middle rollers
Part #206013PW

20" Extension
20" long, 59" wide
Section weight: 50 lbs.
Buoyancy: Offers the same p.s.f. load
capacity as the EZ Port units.
Extension adds approximately
100 lbs. of load support to
Original EZ Port and EZ Port II.
Rollers: 1 stern roller
Part #206010EX

Home | Accessories | Construction | Contact Us | Boat Lifts | Dock Sections
PWC Lifts | Boat Lift | Specifications | Dock Specifications | PWC Lift Specifications
Sample 1 | Sample 2 | Sample 3 | Sample 4  | Sample 5 | Sample 6 | Sample 7 | Miscellaneous Photos