BOAT LIFT SPECIFICATIONS

Adjustable Rollers
Rollers are height adjustable to accommodate most fiberglass V-hull style boats with as little as 14° deadrise angle. Position rollers in either of two trays in four different configurations to achieve eight different heights.

For a Wide Range of Fiberglass V-style Hulls
EZ Port is easily configured to suit many fiberglass V-style hulls. The suggested configurations listed are estimates based on boat length and boat gross weight, including weight of boat, fuel, oil, and on-board cargo.

Specifications
Construction: Linear-Low density Polyethylene with UV stabilizer.
Thickness: Minimum thickness of 5/16", up to 3/4" thick in high impact areas.
Color: Light Beige. Color will determine the temperature of your dock. Dark colors absorb and hold heat. Light colored objects reflect heat so they stay cooler. Not only is this important to bare feet, it protects the dock as well; an over-heated poly-type dock can become soft and prone to distortion.

Winch / Bow Stop Section
20" long, 40" wide, 15" high
Section weight: 45 lbs.
Winch: Fulton XLT series 1400 lb. winch, 20' strap and hook

Intermediate Roller Section
20" long, 40" wide, 15" high
Section weight: 45 lbs.
Rollers: 1 adjustable roller

Stern Roller Section
60" long, 40" / 70" wide, 15" high
Section weight: 150 lbs.
Rollers: Three adjustable rollers. One fixed rear roller.

Home | Accessories | Construction | Contact Us | Boat Lifts | Dock Sections
PWC Lifts | Boat Lift | Specifications | Dock Specifications | PWC Lift Specifications
Sample 1 | Sample 2 | Sample 3 | Sample 4  | Sample 5 | Sample 6 | Sample 7 | Miscellaneous Photos