EZ DOCK ACCESSORIES

Accessories Overview

Most accessories will fit any size dock or port section. Unless otherwise noted, steel hardware is galvanized or zinc plated. Some items are also available in stainless steel, please call to inquire. Brackets shown include the hardware required to attach them to dock sections.

Coupler Assembly

A coupler assembly consists of one top and one bottom coupler, one connection rod, and one nut.

• One Assembly:
Part #301100, $47.84

• Two Assemblies:
Part #301200, $113.86

• Three Assemblies:
Part #301300, $160.97

Coupler Assemblies are also available with stainless steel connection rods.

Coupler Installation Tools

Installation tool simplifies in-water float to float connection.

• Part #900001, $54.06

Dock Wheels

Steel frames with pneumatic wheels make installation or removal of docks easier. Sold in pairs.

• Part #900050, $447.15

8" nylon cleat with two stainless steel 5/16"x 21/4" flat head bolts.

• Part #300100, $12.06

One hardware connector with 5/8" imbedded T-bolt and nut.

• Connector with zinc plated bolt:
Part #201040, $24.20

• Connector with stainless steel bolt:
Part #201040SS, $30.76

Molded Polyethylene bracket includes two coupler pairs.

Polyethylene inserts available for 2.5" O.D. and 3.5" O.D. pipe.

Pipe not included.

• Bracket & insert for 2.5" O.D. pipe:
Part #210250, $105.93
• Bracket & insert for 3.5" O.D. pipe:
Part #210350, $105.93
• Insert only for 2.5" O.D. pipe: Part #10003, $67.98
• Insert only for 3.5" O.D. pipe: Part #10004, $67.98

Molded bracket halves with integral connectors. Use in more moderate conditions, and use two sets to anchor EZ Port PWC Lifts.

• For 2.5" O.D. Pipe:
Part #130250, $105.93

• For 3.5" O.D. Pipe:
Part #130350, $105.93

Polyurethane bracket to attach top of anchoring pipe to stationary docks. Fits 2.5"- 3.5" O.D. Pipe. Bolts not included.

• Part #105100, $39.18

For float to shore anchoring. Includes mainframe and and yoke. 2.5" O.D. pipe and shore attachment systems sold separately. Please call to inquire.

• Frame & Yoke (as shown):
Part #800099, $624.48

• Post / Sleeve for shoreline attachment:
Part #800095-20, $71.14

Molded Polyethylene bracket includes two coupler pairs, polyethylene 3.5" insert and deadweight sleeve. Chain not included.

• Bracket and insert for 3.5" O.D. pipe:
Part #210350, $105.93
• Deadweight insert for #110350 assembly (sleeve). Chain not included. Part #100725P, $57.48

Deadman mainframe bracket includes hardware connectors with nuts. Chain not included. For Stiff-arm attachment order Stiff-arm insert, Shoreline Post sleeve and Anchoring Pipe separately.



• Deadman Mainframe: Part #100700, $216.14
• Stiff-Arm Insert Sleeve: Part #800095-15, $94.22
• Post / Sleeve for shore attach: Part #800095-20, $71.14

For light-duty anchoring with cable and / or to attach 4x4 railing or mooring posts. Galanized bracket includes one hardware connector. Sold in pairs.

• Part #1007111G, $139.00

Our heavy-duty polyethylene bracket allows lateral position adjustment to make attachment to existing piles easier. Rollers allow smooth vertical movement and adjust to fit piles from 6" to 18" in diameter. Polyethylene construction won't rust or corrode, and is ideal for salt-water applications. Includes two coupler pairs.
• Part #300800, $763.11

Two-piece chaseway attaches to side of dock sections allowing power conduits for shore power. Attaching utility channel also widens walkways by 12". Includes attachment hardware. 60" long x 12" wide x 15" high.

• Part #301260, $245.18

Galvanized steel,
mechanical-grade pipe.
Sold in full lengths.

2 3/8" Pipe Caps and Pipe
• Pipe Caps for 2 3/8" OD pipe:
Part #100026, $4.34
• 2 3/8" O.D., 10 gauge pipe, 16':
Part #116025, $98.60
• 2 3/8" O.D., 10 gauge pipe, 18':
Part #118025, $101.29
• 2 3/8" O.D., 10 gauge pipe, 21':
Part #121025, $127.89
• 2 3/8" O.D., 10 gauge pipe, 24':
Part #124025, $144.98

3 1/2" Pipe Caps and Pipe
• Pipe Caps for 3 1/2" OD pipe:
Part #100036, $9.10
• 3 1/2" O.D., 8 gauge, 16':
Part #116035, $169.76
• 3 1/2" O.D., 8 gauge, 18':
Part #118035, $186.47
• 3 1/2" O.D., 8 gauge, 21':
Part #121035, $228.34
• 3 1/2" O.D. 8 gauge, 24':
Part #124035, $260.68

Mainframe piling bracket is predrilled for hoops from 4" to 24" wide. Includes hardware connectors with nuts. Order hoop separately. Bracket and hoops also available in stainless steel.

 

• Mainframe Piling Bracket. Part #100800, $269.83
• 6" Hoop: Part #100806, $95.55
• 8" Hoop: Part #100808, $108.25
• 12" Hoop: Part #100812, $133.39
• 16" Hoop: Part #100816, $154.26
• 20" Hoop: Part #100820, $168.05
• 24" Hoop: Part #100824, $194.29

Add a shortcut to your dock. Corner gussets offer added deck surface and stability to dock fingers when needed.

• Part #300501, $227.85

 

EZ Dock swim ladder is a one-piece ladder designed for maximum safety, with no exposed hardware. Supports up to 400Lbs. (181kg) of weight. Slip-resistant textured surface stays cool in hot weather. Five steps, molded polyethylene. 60" high. Includes attachment hardware.

• Part #300260, $303.52

Standard size aluminum gangways with railing. Order shore and float end hardware separately.

 

• 3' wide, 10' long, no railing: Part #300310NR, $1,694.77
• 3' wide, 10' long, with railing: Part #300310, $1,923.96
• 3' wide, 10' long, with railing: Part #300314, $2,469.48
• 3' wide, 10' long, with railing: Part #300320, $3,278.69
• 5' wide, 10' long, with railing: Part #500510, $2,345.12
• 5' wide, 14' long, with railing: Part #500514, $3,061.12
• 5' wide, 20' long, with railing: Part #500520, $4,115.80

Abutment Hinge Bracket for
Aluminum Gangways

Attach to shore end of 3' and 5' gangways to bolt to shoreline abutment.
 

• Part #50501SS, $306.93
 

Use to attach EZ Dock or EZ Port to other types of floating docks.
Sold in pairs.

• Part #100750, $194.29

Hinged bracket with hardware connectors and nuts attaches gangway to dock.

• 3 Pocket Float Hinge Assembly:
Part #100650SS, $345.50
• 4 Pocket Float Hinge Assembly:
Part #100850SS, $384.17

Gangway Roller allows dock end of gangway to adjust with changing water levels. Kit includes 2 stainless steel brackets, 2 plastic bearings and sheet metal screws. Purchase 3" Schedule 80 PVC pipe separately.

• Roller Kit: Part #300300, $123.51
• PVC Pipe (5'" long, 3" dia.): Part #105030, $32.46
 

Hinged aluminum plate creates smooth transition between shore grade and gangway deck.

• 3' wide: Part #300301, $299.25
• 5' wide: Part #500501, $423.35

Kits include hardware connectors with nuts, hinge to float bracket, hinge to plank bracket and 2 gang plank stiffeners with carriage bolts, nuts and washers. Planking not included.

 

• 24" gangway width (2 2x12s), fits float width 40" and 60":
Part #100240, $235.29
• 34" gangway width (3 2x12s), fits float width 40" and 60":
Part #100340, $294.73
• Shore-end hinge adapter kit for 34" gangway:
Part #150340, $140.47
• 60" gangway width (5 2x12s), fits float width 60":
Part #100600, $430.19
• Shore-end hinge adapter kit for 60" gangway:
Part #150600, $189.77

21/2" high, 31/2" wide, 116" long polyethylene curb. Drill and bolt to docks at imbedded T-nuts. Bolts not included.

Standard color: brown.
• Curb: Part #35116, $83.85
• Bolt: Part #80530SS, $1.04

Auger with bolt and nut. Pipe not included. Photo not available.

• For 2" I.D. pipe: Part #100255, $27.10
• For 3" I.D. pipe: Part #100355, $68.70

Barrier-free railing for security with minimum obstruction. Conforms to SOBA and ADA guidelines. A brown, .125" thick, PVC coating adds beauty, safety, and durability. Hot-dipped galvanized also available. 42" high guardrail.

Style 910, 10' length
• PVC dipped: Part #105910, $670.86
• Galvanized: Part #100910, $592.14

 

Style 911, 5' length
• PVC dipped: Part #105911, $337.96
• Galvanized: Part #100911, 337.80

 

Style 912, 10' length
• PVC dipped: Part #105912, $670.86
• Galvanized: Part #100912, $592.14

 

Style 913, 10' length
• PVC dipped: Part #105913, $670.86
• Galvanized: Part #100913, $592.14

 

Style 914, 5' length
• PVC dipped: Part #105914, $377.96
• Galvanized: Part #100914, $337.80

Modular Railing

Style 915, 5' length
• PVC dipped: Part #105915, $337.96
• Galvanized: Part #100915, $337.80

Style 916, 5' length
• PVC dipped: Part #105916, $337.96
• Galvanized: Part #100916, $337.80

Style 917, 80" length
• PVC dipped: Part #105917, $584.45
• Galvanized: Part #100917, $507.32

Style 918, 80" length
• PVC dipped: Part #105918, $584.45
• Galvanized: Part #100918, $508.17

Style 919, 40" length
• PVC dipped: Part #105919, $376.24
• Galvanized: Part #100919, $330.12

Style 920, 40" length
• PVC dipped: Part #105920, $84.75
• Galvanized: Part #100920, $330.12

Home | Accessories | Construction | Contact Us | Boat Lifts | Dock Sections
PWC Lifts | Boat Lift | Specifications | Dock Specifications | PWC Lift Specifications
Sample 1 | Sample 2 | Sample 3 | Sample 4  | Sample 5 | Sample 6 | Sample 7 | Miscellaneous Photos